| SME Toronto Chapter 26 |
 Rapid Prototyping Seminar Series 98/99 |
| SME Toronto Chapter 26 |
Rapid Prototyping Seminar Series 98/99 |
KEY: Meetings =  Tours =  |
|||
| SEMINARS: were held at the Centennial College Progress Campus at Markham Road and Hwy 401. map. TOURS: Weree included in this series. A map for each tour location will be available on the announcement page for that particular date. Registration is required for this RP SERIES . Please fill out and fax the Registration Form  |
| 1999 | (Listed in reverse order by date.) | ||
| Wednesday, June 2, 1999 |
|
10. FUTURE OF RAPID PROTOTYPING |
Latest developments; Canadian resources, panel discussion. Centennial College, ROOM NUMBER: E129, 1st floor (from the front entrance left, down to the 1st floor, then to the end... Program for the evening |
| Wednesday, May 5, 1999 |
|
9. COST BENEFITS OF RP - THE BOTTOM LINE | Benefits of RP (economic, selling, visualization, improfed tooling quotes). Program for the evening |
| Wednesday, April 21, 1999 | |
OPEN TO ALL: TOUR OF HONEYWELL INC, Scarborough | 7:00 pm. For map and more detailed information, click HERE |
| Wednesday, April 7, 1999 |
|
8. MEDICAL APPLICATION OF RAPID PROTOTYPING | Medican Applications. Program for the evening |
| Wednesday, March 31, 1999 |
|
TOUR OF NRC IN LONDON, ONT. See a report on the tour | Tour of NRC - IMTI in London, Ont. Open to all. Reservations necessary. Please see detailed sheet. |
| Wednesday, March 3, 1999 |
|
7. REVERSE ENGINEERING AND INSPECTION | Reverse Engineering and Inspection (scanning in existing parts or models). Program for the evening |
| Wednesday, February 3, 1999 |
|
6. RAPID PROTOTYPING FOR METAL PARTS AND TOOLING | RP for Metal Parts; Rapid Tooling Program for the evening |
| Wednesday, January 6, 1999 |
|
5. INSTANT FUNCTIONAL PLASTIC PARTS AND TOOLING | RP for Plastic Parts: Primary and Secondary Manufacturing (including tooling for injection nolding). RP materials: selection for correct properties. Program for the evening |
| 1998 | |||
| Wednesday, December 2, 1998 |
|
4. LAMINATED OBJECT MANUFACTURING AND SANDERS MODELMAKER - PLANT TOUR #2 | RP Processes and Industry Examples - Hands-on LOM and Sanders Program for the evening |
| Wednesday, November 25, 1998 |
|
3. A DEEPER LOOK - PLANT TOUR #1 | See Selective Laser Sintering and Stereolithography in action, industry examples. Program for the evening |
| Wednesday, November 4, 1998 |
|
2. TO DO OR NOT TO DO - USING IT SMART | Proper use of RP. Processes: Fused Deposition Modeling (FDM), Solid Ground Curing (SGC) on this on Program for the evening |
| Wednesday, October 7, 1998 |
|
1. THE SEVEN MAIN TECHNIQUES OF RAPID PROTOTYPING | Materials, basic principles, terminology and techniques. Program for the evening |
| Wednesday, September 16, 1998 |
|
TOUR OF HAMOND INDUSTRIES & TALK: DEVELOPING YOUR POTENTIAL |
A tour of Hamond Industries, small metal parts specialitst, and a talk by Harry Carroll, "Developing Your Potential" Program for the evening |
 Back to Main Page |
| Back to Rapid Prototyping Page |