JanuaryEvent
| Ann Arbor Area Chapter 079 JanuaryEvent |
January 2007 Chapter Event
By: Bill Langowski
"Light in Focus: Welding Plastic with Lasers.”
Presenter:
Mr. Frank Fenton, Sales Manager, Power Laser Corporation
Time:
6:30 PM - Gathering, Networking, Light Meal
7:00 PM - Chapter Business
7:15 PM - Presentation & Tour
9:00 PM - Adjournment
Location :
Power Laser Corporation
2 Kexon Drive
Pioneer, OH 43554-9200
Phone: 419-737-3180
Directions:
Take I-94 east or west, to highway US-127 south (exit 144). Head south on US-127 about 40 miles. Just before reaching the MI/OH state line, turn right onto Territorial Road (just over 23 miles from the US-127/US-223 split). Follow Territorial west to MI-99 (about 10 miles), turn south onto MI-99 (which becomes OH-15 in about ½ mile) proceed to Kexon Dr. (approx. 0.7 miles).
Admission Fee:
No Charge
!
Recertification:
Attendees at this event will earn credits toward renewal of CMfgT, CMfgE, CEM, or CEI certification.
RSVP:
Sandy Stewart
Phone: 734-663-2356
E-mail: sstewar3@myway.com
My first experience with industrial lasers happened in Auric Goldfinger’s plant in Switzerland on the evening he was about to cut James Bond in two starting in an extremely delicate area. That was in 1964. Needless to say, industrial lasers and their potential for useful work have progressed mightily since that time. However, if you are like me, you assume the increased potential, but do not have the details. This month you will have the opportunity to advance your knowledge of this field of technology with a visit to a plant that proclaims a “production first philosophy.”
On January 18, 2007 the members of SME Chapter 079 will have the opportunity to visit a plant that manufactures laser workstations. On that Thursday night, the third Thursday of the month, we have been invited to Power Laser Corporation’s Pioneer, OH Plant for a tour and a technical presentation. The presentation will focus on a technological breakthrough initiated commercially by Power Laser, diode laser welding of plastic.
Mr. Fenton promises to school us on this new technology, which has the potential to hermetically seal two plastic substrates together. He will also brief us on the welding, cutting and blank production capabilities of Power Laser’s equipment. Join us on the eighteenth to learn, connect and succeed. Being there is the price, the fellowship comes with your membership, the knowledge and connections you make could be priceless. The evening promises to be provocative and profitable for all. Do not miss this special opportunity!
Plan to join us and enjoy this evening out with a group of fellow manufacturing professionals. Bring your questions and your experiences. There will be time to share.
Space for this unique SME event is limited. Make your reservation today!
SME is committed to providing reasonable accommodations to persons with disabilities who require them in order to fully participate in SME sponsored events. Please contact Sandy Stewart if you require such accommodations.